MARPOSS BLOG: WHAT'S NEW

Non-Contact Tool Breakage Detection System Update

2012-02-12T11:09:00.000+01:00

Mechanical parts mass production usually implies very short machining time. Therefore tool check, useful to guarantee high quality products and few waste parts, must be accomplished in few seconds.

To know more: Non-Contact Tool Breakage Detection System

Tool Verification on Milling Machine and Machining Centres Update

2012-02-11T12:11:00.000+01:00

The use of automatic tool breakage check on CNC machines is cost effective, due to scraps reduction, and has resulted in a significant improvement in production quality.

To know more: Tool Verification on Milling Machine and Machining Centres

Metrel Company Profile Update

2012-02-11T12:05:00.000+01:00

METREL was founded in 1975 by a group of engineers with over ten years experience in the development of electronic measurement equipment to be used on industrial production environment

To know more:
Metrel Company Profile
Metrel Brand
Metrel Map

Mida Software Manuals Update - Laser SW For Machining Centers And Milling Machines

2012-02-10T11:42:00.000+01:00

Mida Software Manuals Update - Laser SW For Machining Centers And Milling Machines

Laser software for machining centers and milling machines

D310D3AD09.pdf    German    Tool check    Siemens 840D-840Di-810D-828D
D310D3AE09.pdf    Spanish    Tool check    Siemens 840D-840Di-810D-828D
D310D3AF09.pdf    French    Tool check    Siemens 840D-840Di-810D-828D
D310D3AG09.pdf    English    Tool check    Siemens 840D-840Di-810D-828D
D310D3AI09.pdf    Italian    Tool check    Siemens 840D-840Di-810D-828D

To know more: Mida Software Manuals - Laser software for machining centers and milling machines

Mida Software Manuals Update - Probing Software For Lathes And Turning Centers

2012-02-09T11:41:00.000+01:00

Mida Software Manuals Update - Probing Software For Lathes And Turning Centers

Probing software for lathes and turning centers

D310D4AG01.pdf English Tool check Siemens 840D-840Di-810D-828D

To know more: Mida Software Manuals - Probing software for lathes and turning centers

Mida Software Manuals Update - Laser Software For Turning Centers

2012-02-07T11:35:00.004+01:00

Laser software for turning centers Mida software instructions manuals update

D310D6AD02.pdf    German    Tool check    Siemens 840D-840Di-810D-828D
D310D6AE02.pdf    Spanish    Tool check    Siemens 840D-840Di-810D-828D
D310D6AF02.pdf    French    Tool check    Siemens 840D-840Di-810D-828D
D310D6AG02.pdf    English    Tool check    Siemens 840D-840Di-810D-828D
D310D6AI02.pdf    Italian    Tool check    Siemens 840D-840Di-810D-828D

To know more: Mida Software Manuals - Laser software for turning centers

IPTEX in Mumbai, India

2012-02-03T19:24:00.000+01:00

Marposs next week will be at the IPTEX in Mumbai, India

Marposs has become partner in the MUPROD Project of the European Commission

2012-02-02T19:23:00.000+01:00

The project aims at developing an innovative Quality Control System that will drastically change the current concept of End Of Line quality control, going beyond established methodologies such as Six-sigma and SPC. It will prevent the generation of defects within the process at single stage and the propagation of defects between processes at multi-stage system level. Application domains will include emerging strategic European sectors such as the production of electrical engines for sustainable mobility, large-part manufacturing for the wind power sector and the production of customised micro-intravascular catheters as high value medical products for the aging society.

To know more: Marposs is partner in the MUPROD Project of the European Commission.

SAMUMETAL in Pordenone, Italy

2012-01-27T20:14:00.000+01:00

Marposs next week will be at the SAMUMETAL in Pordenone, Italy

Compact and Economical Solution for Verifying Tool Integrity

2012-01-13T16:33:00.002+01:00

Marposs will show at WESTEC 2012 in booth #1944 its Mida TBD non-contact tool breakage detector unit for fast and reliable verification of tool presence or breakage inside the machine tool.

To know more follow the link: Compact and Economical Solution for Verifying Tool Integrity

Marposs T&E awarded by the Korean Small and Medium Business Administration (SMBA)

2012-01-12T16:32:00.000+01:00

During the yearly gala dinner hosted by KOMMA, the Korean Machine Tools Manufacturers Association, Marposs T&E was awarded by SMBA for the contribution given to the development of the Korean Machine Tools Industry.

To know more follow the link: Marposs T&E awarded by the Korean Small and Medium Business Administration (SMBA)

User's Manual Update MIDA Laser 105

2012-01-10T15:21:00.000+01:00

MIDA Laser 105 User's Manual Update

D31015FF00.pdf French User's Manual

To know more: MIDA Laser 105

Instruction Manual Update Spindle Probing System For Lathes and Turning Centres - E83L

2012-01-10T15:18:00.000+01:00

E83L - Spindle Probing System For Lathes and Turning Centres Instruction Manual update

D31016BM40.pdf multilanguage (Eng Ger Ita Fre) Instruction Manual RXI

To know more: Spindle Probing System For Lathes and Turning Centres Instruction Manual

Mida Software Manuals Update - Laser SW For Turning Centers

2012-01-09T15:11:00.003+01:00

Laser software for turning centers Mida software instructions manuals update

D310A6A300.pdf Traditional Chinese Tool check Fanuc and similar
D310A6A300.pdf Traditional Chinese Tool check Mazatrol

To know more: Mida Software Manuals - Laser SW For Machining Centers And Milling Machines

CTM Operator Seminar + CTM Seminar for Experts

2012-01-04T19:25:00.000+01:00

Practice Oriented Training: Seminars in English and German for the Year 2012

Marposs Monitoring Systems allow you the most efficient, safest and optimized production.

Our trainings help to create more process transparency, show tooling or machine problems as well as part abnormalities and many more.
They help you to efficiently use your machines, tools and other investments like energy, media or material.

To know more: CTM Operator Seminar + CTM Seminar for Experts

Speed Cuts Down Cycle Time

2011-12-19T17:58:00.003+01:00

Speed Cuts Down Cycle Time
Article from WB Werkstatt + Betrieb, August 2011 issue

The WRS radio transmission probing system for the use in machine tools allows for extremely short actuation times. Users will benefit from enhanced process safety and reduced cycle times.

To know more: WRS radio transmission probing system

Marposs Awarded by EUCCK as SME Star for 2011

2011-12-09T11:05:00.000+01:00

Marposs received in Seoul, the SME Star Award for its commitment in the Korean market

The European Union Chamber of Commerce in Korea (EUCCK) presented the Korea-EU awards 2011 on the occasion of the Industrial Cooperation day on November 22, 2011.

The awards highlight the important role played by European Companies in Korea as well as the commitment of Korean Government authorities in building bridges between the two sides.

Marposs Co. Ltd. is the recipient of the 2011 SME Star Award in recognition of the long-term involvement in Korea, clear sign of Marposs' commitment to this market and this Country as European investor.

METALEX in Bangkok, Thailand

2011-11-15T10:23:00.002+01:00

Marposs next week will be at METALEX in Bangkok, Thailand

Mida Software Manuals - Laser SW For Machining Centers And Milling Machines

2011-11-08T18:17:00.000+01:00

Laser software for machining centers and milling machines Mida software instructions manuals update

D310P3AD01.pdf    German    Tool check    Okuma
D310P3AE01.pdf    Spanish    Tool check    Okuma
D310P3AF01.pdf    French    Tool check    Okuma
D310P3AG01.pdf    English    Tool check    Okuma
D310P3AI01.pdf    Italian    Tool check    Okuma

To know more: Mida Software Manuals - Laser SW For Machining Centers And Milling Machines

Mida Software Manuals - Probing SW For Machining Centers And Milling Machines

2011-11-07T21:08:00.000+01:00

Probing software for machining centers and milling machines Mida software instructions Manuals Update

D310D2AI07.pdf    Italian    Part check    Siemens 840D-840Di-810D-828D
D310D2AG07.pdf    English    Part check    Siemens 840D-840Di-810D-828D
D310D2AF07.pdf    French    Part check    Siemens 840D-840Di-810D-828D
D310D2AE07.pdf    Spanish    Part check    Siemens 840D-840Di-810D-828D
D310D2AD07.pdf    German    Part check    Siemens 840D-840Di-810D-828D

To know more: Mida Software Manuals - Probing SW For Machining Centers And Milling Machines

Mida Software Manuals - Laser SW For Machining Centers And Milling Machines

2011-11-04T20:56:00.001+01:00

Laser software for machining centers and milling machines Mida software instructions manuals update

D310D3AI08.pdf    Italian    Tool check    Siemens 840D-840Di-810D-828D
D310D3AG08.pdf    English    Tool check    Siemens 840D-840Di-810D-828D
D310D3AF08.pdf    French    Tool check    Siemens 840D-840Di-810D-828D
D310D3AE08.pdf    Spanish    Tool check    Siemens 840D-840Di-810D-828D
D310D3AD08.pdf    German    Tool check    Siemens 840D-840Di-810D-828D
D310F3AI04.pdf    Italian    Tool check    Selca 3000-4000
D310F3AG04.pdf    English    Tool check    Selca 3000-4000
D310F3AF04.pdf    French    Tool check    Selca 3000-4000
D310F3AD04.pdf    German    Tool check    Selca 3000-4000
D310F3AE04.pdf    Spanish    Tool check    Selca 3000-4000
D310L3AF00.pdf    French    Tool check    Fagor 8050-8055
D310L3AD00.pdf    German    Tool check    Fagor 8050-8055

To know more: Mida Software Manuals - Laser SW For Machining Centers And Milling Machines

ENGIMACH, in Ahmedabad, India

2011-10-23T22:23:00.000+02:00

Marposs from Nov 23, 2011 to Nov 27, 2011 will be at ENGIMACH, in Ahmedabad, India Hall 10, Booth 8

QUALITY EXPO in Istanbul, Turkey

2011-10-18T10:19:00.000+02:00

Marposs next week will be at QUALITY EXPO in Istanbul, Turkey

Marposs Acquires Control of Santec Automation

2011-10-17T20:00:00.000+02:00

Marposs S.P.A. is proud to announce the acquisition of Santec Automation of Viernheim, Germany through its affiliate Artis GMBH.

SANtec was created in 1998 by Mr. Wolfgang Sawicki, through a management buy-out of an existing division of Sandvik Automation, already active since almost 20 years in the field of automating and monitoring the machining production process.

To know more: Marposs Acquires Control of Santec Automation

SEOUL AIRSHOW AND DEFENSE in Seoul, Korea

2011-10-13T10:18:00.000+02:00

Marposs next week will be at SEOUL AIRSHOW AND DEFENSE in Seoul, Korea

The Last EMO Exhibition Booth Photos

2011-10-06T16:11:00.000+02:00

Some photos shot at Marposs booth in Hannover at the EMO Exhibition

Follow the link: The Last EMO Exhibition Booth Photos

Mida TS Line Instruction Manual - Touch Probes for Tool Setting on Machining Centers And Milling Machines

2011-10-05T16:05:00.000+02:00

Touch probes for tool setting on machining centers and milling machines instruction manual update

D4340041M1.pdf multilanguage (Eng Ger Ita Fre Spa) Instruction Manual TS30 file version
for T18 - TS30 - OTS30 - WRTS products

To know more: Touch Probes for Tool Setting on Machining Centers And Milling Machines

Mida Software Manuals - Laser SW For Machining Centers And Milling Machines

2011-10-04T12:12:00.000+02:00

Laser software for machining centers and milling machines Mida software instructions manuals update

D310P3AF00.pdf    French    Tool check    Okuma
D310P3AE00.pdf    Spanish    Tool check    Okuma
D310P3AD00.pdf    German    Tool check    Okuma

To know more: Mida Software Manuals - Laser SW For Machining Centers And Milling Machines

Mida Software Manuals - Probing SW For Machining Centers And Milling Machines

2011-10-03T12:00:00.000+02:00

Probing software for machining centers and milling machines Mida software instructions Manuals Update

D310P2AF00.pdf    French    Part check    Okuma
D310P2AE00.pdf    Spanish    Part check    Okuma
D310P2AD00.pdf    German    Part check    Okuma

To know more: Mida Software Manuals - Probing SW For Machining Centers And Milling Machines

M2 Wave - Wireless Electronic Manual Snap Gauge

2011-09-30T11:22:00.000+02:00

The M2 Wave is an extremely precise electronic comparator developed to inspect outside diameters, it is designed for all customers who consider devices connected to the display unit through cable as an obstacle, or simply as a discomfort, to use.

To know more: M2 Wave - Wireless Electronic Manual Snap Gauge

Concentrating Solar Power - The Marposs and Enea Cooperation

2011-09-29T17:50:00.000+02:00

Marposs and Enea have recently completed the development of optical inspecting devices (VIS) to verify the parabolic shape of mirror panels and the mutual alignment between receiver and parabolic modules...

To know more: Marposs in Concentrating Solar Power

SCANDINAVIAN TECHNICAL FAIR in Alvsjo Stockholm, Sweden

2011-09-27T15:55:00.002+02:00

Marposs next week will be at SCANDINAVIAN TECHNICAL FAIR in Alvsjo Stockholm, Sweden

MSV BRNO in Brno, Czech Republic

2011-09-26T15:53:00.004+02:00

Marposs next week will be at MSV BRNO in Brno, Czech Republic

Marposs Celebrates 25 Years of Activity in Korea

2011-09-23T16:12:00.000+02:00

Marposs Korea was established in 1986 following the Company philosophy of reaching and supporting our Customers everywhere in the world.
This year Marposs Company Ltd. Korea celebrates the 25th anniversary of its foundation, as part of the global Marposs Group, leader in the world for standard and custom metrology solutions

To know more: Celebrating 25 Years of Activity in Korea

MECT in Port Messe Nagoya, Japan

2011-09-20T15:28:00.000+02:00

Marposs next week will be at MECT in Port Messe Nagoya, Japan

ORTHOTEC EUROPE in Regensdorf, Switzerland

2011-09-19T15:33:00.001+02:00

Marposs next week will be at ORTHOTEC EUROPE in Regensdorf, Switzerland

Optoprocess (Digital Version) Brochures Updates

2011-09-16T18:41:00.007+02:00

Optical Measuring System For Static And Dynamic External Diameters Control

D6O00700I0.pdf Italian
D6O00700G0.pdf English
D6O00700F0.pdf French
D6O00700E0.pdf Spanish
D6O00700D0.pdf German

To know more: Optoprocess Optical Measuring System For Static And Dynamic External Diameters Control

P3SE - Monitoring System For Grinding Machines

2011-09-15T18:31:00.010+02:00

Monitoring System For Grinding Machines P3SE model - Instruction manual update

D2P30000JF.pdf Japanese Instruction Manual
D2P30000FF.pdf French Instruction Manual
D2P30000EF.pdf Spanish Instruction Manual
D2P30000CF.pdf Simplified Chinese Instruction Manual

To know more: P3SE - Monitoring System For Grinding Machines

MIDA Tool Eye™ - High Precision Arm For Tool Setting On Lathes

2011-09-14T18:24:00.001+02:00

D6C0210130.pdf Traditional Chinese Brochure Update

To know more: MIDA Tool Eye™ - High Precision Arm For Tool Setting On Lathes

QUALITY EXPO in Rosemont, IL, U.S.A.

2011-09-14T18:18:00.000+02:00

Marposs next week will be at QUALITY EXPO in Rosemont, IL, U.S.A.

EMO in Hannover, Germany

2011-09-13T18:16:00.000+02:00

Marposs next week will be at EMO in Hannover, Germany

VISFIELD™ Brochures Update

2011-09-13T18:14:00.002+02:00

Brochures Updated

VISfield_I.pdf    Italian
VISfield_G.pdf    English
VISfield_E.pdf    Spanish

To know more: VISFIELD™ Brochures Update

Mida Software Manuals - Probing SW For Machining Centers And Milling Machines

2011-09-12T18:06:00.002+02:00

Probing software for machining centers and milling machines Mida software instructions Manuals Update

D310D1AF02.pdf    French    Tool check    Siemens 840D-840Di-810D-828D
D310D1AE02.pdf    Spanish    Tool check    Siemens 840D-840Di-810D-828D
D310D1AD02.pdf    German    Tool check    Siemens 840D-840Di-810D-828D

To know more: Mida Software Manuals - Probing SW For Machining Centers And Milling Machines

E9066N™ Flat Panel - Industrial PC Based Workstation

2011-09-09T11:58:00.000+02:00

D6D00003J0.pdf Japanese Brochure Update

To know more: E9066N™ Flat Panel - Industrial PC Based Workstation

Mida Software Manuals - Laser SW For Machining Centers And Milling Machines

2011-09-08T17:48:00.000+02:00

Laser software for machining centers and milling machines Mida software instructions manuals update

D310R3AI00.pdf Italian Tool check Heidenhain iTNC 620
D310R3AG00.pdf English Tool check Heidenhain iTNC 620
D310R3AF00.pdf French Tool check Heidenhain iTNC 620
D310R3AE00.pdf Spanish Tool check Heidenhain iTNC 620
D310R3AD00.pdf German Tool check Heidenhain iTNC 62

To know more: Mida Software Manuals - Laser SW For Machining Centers And Milling Machines

P3ME - Gauge For Grinding Machine

2011-09-07T17:38:00.001+02:00

Gauge for grinding machine P3ME user's manuals upgrade.

D2P30001IF.pdf Italian User's Manual
D2P30001GF.pdf English User's Manual
D2P30001FF.pdf French User's Manual
D2P30001EF.pdf Spanish User's Manual
D2P30001DF.pdf German User's Manual

To know more: P3ME - Gauge For Grinding Machine

Mida Software Manuals - Probing SW For Machining Centers And Milling Machines

2011-09-06T17:33:00.001+02:00

Probing software for machining centers and milling machines Mida software instructions Manuals Update

D310T2AI00.pdf Italian Part check Osai
D310T2AF00.pdf French Part check Osai
D310T2AE00.pdf Spanish Part check Osai
D310T2AD00.pdf German Part check Osai
D310T2AG00.pdf English Part check Osai

To know more: Mida Software Manuals - Probing SW For Machining Centers And Milling Machines

Mida Software Manuals - Laser SW For Machining Centers And Milling Machines

2011-09-05T10:30:00.000+02:00

Laser software for machining centers and milling machines Mida software instructions manuals update

D310T3AI00.pdf Italian Tool check Osai
D310T3AG00.pdf English Tool check Osai
D310T3AF00.pdf French Tool check Osai
D310T3AE00.pdf Spanish Tool check Osai
D310T3AD00.pdf German Tool check Osai

To know more: Software Manuals - Laser SW For Machining Centers And Milling Machines

Measurement: The ABC's of In-Line Gaging

2011-09-04T10:44:00.001+02:00

A Quality Magazine Article, August 2011
A thorough, methodical evaluation of the application, combined with a realistic analysis of the economics, and an in-depth examination of a potential supplier’s product lines and experience

To Know more: Measurement: The ABC's of In-Line Gaging

Marposs received the Panda d'Oro award

2011-09-03T10:39:00.000+02:00

Marposs received the Panda d'Oro award, category 150th Italian Anniversary Life Recognition Award

In occasion of the CCIC Gala Dinner Event, China-Italy Chamber of Commerce (CCIC) and Fondazione Italia Cina have awarded with Panda d’Oro – 2011 Edition the Chinese and Italian companies which most contributed in the past and recent years to the development and reinforcement of economic bilateral relations.

To lnow more: Marposs Panda D'Oro 2011

Optoprocess

2011-09-02T18:32:00.001+02:00

The Digital Optoprocess System represents the ideal solution for contactless control of external diameters in Centerless Grinding...

To know more: Optical Measuring System For Static and Dynamic External Diameters Control

VISFIELD™

2011-09-01T18:20:00.000+02:00

Concentrating solar power (CSP) trough inspection.
The mobile optical measuring system to set up a trough module in a CSP plant for verification and adjustment of mutual alignment between linear parabolic mirror and receiver.

To know more: VISFIELD™

VISPROFILE™

2011-08-31T17:53:00.000+02:00

Concentrating solar power (CSP) panels inspection during the manufacturing process
The optical measuring system to check the shape of parabolic mirrors in the manufacturing environment...

To know more: VISPROFILE™

FEBRAMEC in Caxias Do Sul, Brazil

2011-07-26T10:13:00.002+02:00

Marposs next week will be at FEBRAMEC in Caxias Do Sul, Brazil

Marposs Mexico celebrates its 30th anniversary

2011-07-02T10:23:00.000+02:00

Happy Birthday to Marposs S.A. de C.V.

Started on July 13th, 1981 as a little representation to cover in a better way the internal market, Marposs Mexico has changed to become a very competitive company ready to offer its customers the best solution for their measuring and control applications and get their satisfaction to continue improving the business in the Mexican market.

To know more: 30th Anniversary for Marposs Mexico

EASTPO in Shanghai, China

2011-06-21T16:03:00.002+02:00

Marposs next week will be at EASTPO in Shanghai, China

Marposs P3ME - Gauge For Grinding Machine

2011-06-17T11:35:00.000+02:00

For dimensional control on grinding machines, the latest system from Marposs includes the new P3ME electronic unit that represents a precise, reliable, economic and compact solution.

To know more: Marposs P3ME - Gauge For Grinding Machine

2011: Three Good Reasons To Celebrate This Year

2011-06-16T11:35:00.000+02:00

In 2011 we celebrate the 150-year anniversary of the Unification of Italy. The company is approaching its 60th birthday (it was founded in Italy in 1952) and this year it is also celebrating the 25th anniversary of its direct presence in China.

INTERMOLD THAILAND in Bangkok, Thailand

2011-06-14T15:57:00.000+02:00

Marposs next week will be at INTERMOLD THAILAND in Bangkok, Thailand

Mida Software Tool Check Manuals - Probing SW For Machining Centers And Milling Machines

2011-06-11T15:10:00.001+02:00

Probing sw for machining centers and milling machines Mida software tool check manuals update

D310A1A306.pdf Traditional Chinese Tool check Mazatrol
D310A1AD06.pdf German Tool check Mazatrol
D310A1AE06.pdf Spanish Tool check Mazatrol
D310A1AF06.pdf French Tool check Mazatrol
D310A1AG06.pdf English Tool check Mazatrol
D310A1AI06.pdf Italian Tool check Mazatrol

To know more: Probing sw for machining centers and milling machines

Mida Software Part Check Manuals - Probing SW For Machining Centers And Milling Machines

2011-06-10T15:07:00.000+02:00

Probing sw for machining centers and milling machines Mida software part check manuals update

D310A5AF03.pdf French Part check Mazatrol
D310A5AG03.pdf English Part check Mazatrol

To know more: Probing SW For Machining Centers And Milling Machines

Mida Software Tool Check Manuals - Probing SW For Lathes And Turning Centers

2011-06-09T15:03:00.000+02:00

Probing sw for lathes and turning centers Mida software tool check manuals update

D310A4A305.pdf Traditional Chinese Tool check Mazatrol
D310A4AE05.pdf Spanish Tool check Mazatrol
D310A4AF05.pdf French Tool check Mazatrol
D310A4AG05.pdf English Tool check Mazatrol
D310A4AI05.pdf Italian Tool check Mazatrol
D310A4AD05.pdf German Tool check Fanuc and similar
D310A4AD05.pdf German Tool check Mazatrol

To know more: Probing SW For Lathes And Turning Centers

Mida Software Tool Check Manuals - Laser SW For Machining Centers And Milling Machines

2011-06-08T14:58:00.000+02:00

Laser sw for machining centers and milling machines Mida software tool check manuals update

D310D3AD07.pdf German Tool check Siemens 840D-840Di-810D-828D
D310D3AE07.pdf Spanish Tool check Siemens 840D-840Di-810D-828D
D310D3AF07.pdf French Tool check Siemens 840D-840Di-810D-828D
D310D3AG07.pdf English Tool check Siemens 840D-840Di-810D-828D
D310D3AI07.pdf Italian Tool check Siemens 840D-840Di-810D-828D

To know more: Laser SW For Machining Centers And Milling Machines

ITM Poland in Poznan, Poland

2011-06-07T15:52:00.002+02:00

Marposs next week will be at POZNAN ITM in Poznan, Poland

Mida Software Part Check Manuals - Probing SW For Machining Centers And Milling Machines

2011-06-06T14:54:00.000+02:00

Probing sw for machining centers and milling machines Mida software part check manuals update

D310D2AE06.pdf Spanish Part check Siemens 840D-840Di-810D-828D
D310D2AG06.pdf English Part check Siemens 840D-840Di-810D-828D
D310D2AI06.pdf Italian Part check Siemens 840D-840Di-810D-828D
D310D2AD06.pdf German Part check Siemens 840D-840Di-810D-828D
D310D2AF06.pdf French Part check Siemens 840D-840Di-810D-828D

To know more: Probing SW For Machining Centers And Milling Machines

DMC in Shanghai, China

2011-05-24T19:01:00.001+02:00

Marposs next week will be at DMC in Shanghai, China

ORTHOTEC in Winona Lake (Warsaw), IN, U.S.A.

2011-05-18T18:58:00.003+02:00

Marposs next week will be at ORTHOTEC in Winona Lake (Warsaw), IN, U.S.A.

MSV NITRA in Nitra, Slovakia

2011-05-17T18:51:00.002+02:00

Marposs next week will be at MSV NITRA in Nitra, Slovakia

FEIMAFE in Sao Paulo, Brazil

2011-05-16T18:54:00.000+02:00

Marposs next week will be at FEIMAFE in Sao Paulo, Brazil

EASTEC in West Springfield, MA, USA

2011-05-10T18:53:00.002+02:00

Marposs next week will be at EASTEC in West Springfield, MA, USA

The 25th Anniversary of Marposs Direct Presence in China

2011-05-10T17:58:00.002+02:00

On November 4th, 1986, Marposs officially established its first trading company in Hong Kong...
To know more follow the link: The 25th Anniversary of Marposs Direct Presence in China

CHINA GLASS in Shanghai, China

2011-05-03T18:50:00.000+02:00

Marposs next week will be at CHINA GLASS in Shanghai, China

NEMO, The New Very Compact Gauge Computer for Simple Measurement Applications

2011-05-02T10:36:00.007+02:00

Marposs announces the new gage computer Nemo.
This new professional very compact computer, rugged and reliable, offers innovative features allowing to make simple measurement applications in an intuitive and fast way

To know more about: NEMO, The New Very Compact Gauge Computer for Simple Measurement Applications

The Last CIMT Exhibition Marposs Booth Photos

2011-04-30T15:51:00.000+02:00

If you missed the last CIMT Exhibition in Bejing, then you may see here some photos of our booth:
The Last CIMT Exhibition Marposs Booth Photos

CONTROL in Stuttgart, Germany

2011-04-26T11:46:00.001+02:00

Marposs next week will be at CONTROL in Stuttgart, Germany

Research & Development - Padua Center

2011-04-14T09:44:00.000+02:00

The CRE (Center of Electronic Research) is located in Padua, via Armistizio 277, in the premises of Villa Giusti.
The R&D activities of CRE are focused on the design and preliminary test of electronic products both with microprocessor-based architecture and analog-digital mixed architecture...

To know more: Research & Development activities of the Center of Electronic Research

Touch Probes for Tool Setting on Machining Centers and Milling Machines

2011-04-13T12:11:00.000+02:00

The T18 - TS30 - OTS30 - WRTS, touch probes for tool setting on machining centers and milling machines page, has been updated

INTERMOLD in Tokyo, Japan

2011-04-12T11:52:00.000+02:00

Marposs next week will be at INTERMOLD in Tokyo, Japan

On-machine Probing Technology for Mold Manufacture

2011-04-11T16:19:00.000+02:00

On-machine probing is a rapidly evolving technology that can impact significantly both productivity and quality in high-value moldmaking operations.

In this article from "Mold Making Technology Magazine", April 2011 issue, Sharad Mundra, product manager for the MIDA line of probing products from Marposs Corp., Auburn Hills, Mich., illustrates decision points to help customers select the right probing system.

To know more: On-machine probing technology for mold manufacture

AMERIMOLD in Rosemont, IL, U.S.A.

2011-04-05T11:49:00.001+02:00

Marposs next week will be at AMERIMOLD in Rosemont, IL, U.S.A.

Affidabilità' & Tecnologie, in Turin Italy

2011-04-05T11:00:00.000+02:00

Marposs next week will be at Affidabilità' & Tecnologie, in Turin Italy

CIMT in Beijing, China

2011-04-03T12:01:00.004+02:00

Marposs next week will be at CIMT in Beijing, China

MEDTEC UK in Birmingham, Great Britain

2011-03-26T10:47:00.000+01:00

Marposs next week will be at the MEDTEC UK in Birmingham, Great Britain

Welcome Back! A thought to all of our colleagues and customers in Japan

2011-03-23T20:27:00.001+01:00

After the catastrophic events in Japan, Marposs office in Tokyo has re-opened on March 22, customers may reach it again.

Let us send our colleagues in Japan our heartly welcome back and wish a quick return to a normal life to all the people in Japan.

TECMA in Mexico City, Mexico

2011-03-22T10:55:00.000+01:00

Marposs next week will be at TECMA in Mexico City, Mexico

2010-2011 Mario Possati Memorial Fellowship Awarded

2011-03-16T10:50:00.000+01:00

Unindustria, Marposs and Johns Hopkins Jointly Promote International Education in the name of Mario Possati.

2010-2011 "Mario Possati" Memorial Fellowship Awarded to a student from Albania

MTA SINGAPORE in Singapore

2011-03-15T10:58:00.000+01:00

Marposs next week will be at MTA SINGAPORE in Singapore

The Merlin Plus™

2011-03-15T10:48:00.000+01:00

The Merlin Plus™, Windows XP Gage Computer page has been updated

INTERMOLD KOREA in Kintex, Korea

2011-03-08T10:57:00.002+01:00

Marposs next week will be at INTERMOLD KOREA in Kintex, Korea

TIMTOS in Taipei, Taiwan

2011-02-22T10:25:00.002+01:00

Marposs next week will be at TIMTOS in Taipei, Taiwan

Intec in Leipzig, Germany

2011-02-22T10:21:00.001+01:00

Marposs next week will be at the Intec in Leipzig, Germany

M9VG - Valve Seat Inspection Gauge

2011-02-03T23:00:00.000+01:00

The M9VG motorized manual plug completes the range of Marposs products available for cylinder head inspection.
It performs 2 dynamic inspections after bushing insertion...

To know more follow the link: M9VG - Valve Seat Inspection Gauge

Practical Applications Of Automated Precision Parts Manufactured Using Process Control Technologies

2011-01-31T23:19:00.000+01:00

Many repetitive machining and assembly tasks have been offshored to areas of the world with less sophisticated infrastructure and much lower labor costs.

To know more about the article from Manufactoring News, november 2010 issue, follow the link:
Practical Applications Of Automated Precision Parts Manufactured Using Process Control Technologies

Medical Device & Technology Test Expo in Cologne, Germany

2011-01-31T10:19:00.001+01:00

Marposs next week will be at the Medical Device & Technology Test Expo in Cologne, Germany

LP-15™ - Industrial LCD Panel

2011-01-27T16:07:00.001+01:00

The LP-15™ Industrial LCD Panel is an industrial Operator Panel, provided in a compact, refined and highly integrated industrial design.
Supplied with a 15” LCD, an optional 5-wire resistive touch-screen, it supports USB-compliant devices (keyboard, mouse, etc), for HMI-based inter-operability.

To Kow more: LP-15™ - Industrial LCD Panel

E78 - Electronic Controller For Grinding Wheel Balancing

2011-01-25T23:36:00.000+01:00

The Marposs E78 balancer is a microprocessor electronic amplifier that continuously controls the vibration of the grinding wheel.

This electronic unit is used with Balancing Heads.

To know more visit: E78 - Electronic Controller For Grinding Wheel Balancing

E82 - Electronic Controller for grinding wheel balancing with integrated wheel control

2011-01-21T09:32:00.001+01:00

The Marposs E82 balancer is a microprocessor electronic amplifier for wheel balancing, gap, crash and dressing control.

The E82 provides the same balancing operations as the E78.

This electronic unit is used with Balancing Heads.

To know more visit: E82 - Electronic Controller for grinding wheel balancing with integrated wheel control

IMTEX -TOOLTECH in Bangalore, India

2011-01-11T10:16:00.000+01:00

Marposs next week will be at IMTEX -TOOLTECH in Bangalore, India

Marposs After Sales Service

2011-01-10T09:28:00.001+01:00

Nowadays Marposs has 200 qualified service engineers operating on more than 50 service centers worldwide located, to be conveniently close to customers, not only in terms of language, but also in terms of business approach.

To know more follow the link: Marposs After Sales Service

The “China Award 2010 - Top Investor” to Marposs

2010-12-06T22:30:00.003+01:00

Marposs S.p.A. of Bentivoglio (Bologna) was awarded, in the class “Top Investor in China 2010”, in the context of the fifth edition of “China Awards”.

To Kow more: Marposs and the "Top Investor in China 2010" Award